Subaru Forester Remote Start Kit for 2019 - 2022 - 100% Plug & Play - Push Start

  • Sale
  • $325.00
  • Regular price $399.00



Subaru Forester Remote Start Plug & Play 2019 - 2022 w/ Push Start system

Our Subaru Forester remote starter kit is 100% plug & play on most trim levels! Keep your vehicle warm in the winter and cool in the summer. Installation is simple and takes most consumers less than an hour. Our remote system interfaces with a t-harness at the driver underdash and few more behind the glovebox. Simply unplug the OEM connectors, plug our connectors inline and then plug the OEM plug into the other end of our t-harnesses. No dealer visit or scantool necessary. Once installed simply press the lock button on your OEM remote 3 times to start your Forester or choose one of our long range options to go with it.

  • Complete Kit Comes with ALL parts necessary
  • Quick, easy, PLUG & PLAY installation
  • Simple programming no dealer visit necessary!
  • Will not shutdown when getting in - get in and go!
  • Printed installation instructions included.
  • Thousands of units sold!

 

Installation Overview

Simple installation full plug and play on US made vehicles. Certain trim levels and Canadian vehicle will require 1 manual wire connection/interrupt.

Please note this installation requires a 2-part programming procedure with copying technology. This means you need to install the module, learn the vehicle, and then remove the module and send it back to us for processing. Use the included prepaid return label (excluding Canada) to send the module to us. We will process the module and then send it back to you to complete the installation. Simple!

 

Compatibility Requirements

  • 2019 2020 2021 2022 Subaru Forester
  • 10th position/letter of your VIN # must be an K, L, M or N
  • PUSH Start only will NOT work on standard key start vehicles.
  • Automatic transmission only.
  • Vehicle must have power locks / keyless entry

 

System Operation

Pressing the lock button 3 times on your current OEM remote will START the vehicle.

Pressing the lock button 3 times on your current OEM remote will STOP the vehicle.

Vehicle will run for 15 minutes and then shutdown if you don't go out and get in.

After remotely starting, simply get in and press the brake to takeover the vehicle. You are then ready to drive no need to shutdown or restart the vehicle.


Purchase Upgrade Options Explained - Select Above

  • 3x Lock From OEM Fob Only = No additional remotes to carry simply press LOCK 3 times on your factory remote to activate the remote starter.
  • 1-Way 1500 ft = Comes with (2) 1-Button remote fobs for up to 1500 ft range + 3x lock from OEM fob will work as well.
  • 2-Way 3000 ft = Comes with (2) 1-Button 2-way remote fobs for up to 3000 ft range + 3x lock from OEM fob will work as well.
  • SmartPhone APP Control = Start your car from your smartphone from anywhere in the world. 1st year of service free and then $39.99/year after.
  • (NOTE: REMOTE STYLES CHANGE FROM TIME TO TIME THE REMOTES RECEIVED MAY NOT LOOK IDENTICAL TO THE PICTURES ABOVE)

 

 

 

Customer Reviews

Based on 3 reviews Write a review

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Rob Smith
2019 Subaru Forester Sport

2019 Subaru Forester Sport

Works great once you iron out a few kinks. Instructions a little misleading but installation wasn't terribly difficult.

First off, don't look at the picture on the front page of the instructions. There's a giant red arrow pointing to the fuse box. You do NOT need to do anything with the fuse box. Remove the instrument cluster. The 28 and 30 pin wires are plugged into the dash BEHIND the cluster. You 100% have to remove it. YouTube it. Remove 2 screws above instrument cluster, then 4 more once you remove trim. Remove vent to the right of the steering wheel using the plastic tool provided. Unplug 28 and 30 pin from car, and plug those into the harness going to the module, then module harness back into car. Use instruction sheet to program. Instructions tell you to remove the module and add bypass wire, but I didn't have any luck leaving harness plugged in without module. Car stalled. I unplugged harness and set aside for when we got the module back from Accessorides.

Installation was much easier the 2nd time around. Supposed to be plug and play once you get it back, but for some reason I wasn't getting power to the module. I called Tech Support and Mike walked me through the process. Ended up just needing to reset the module by unplugging the 6 pin, and holding the program button while plugging back in the 6 pin and holding program button until red and blue lights were solid. Car starts great from inside my house. Thanks Mike!

S
Steve
2022 Forester Wilderness Remote Start

Very easy install, made a lot easier by taking the gauge cluster out...it isnt difficult just make sure the steering wheel is all the way out and down and make sure to remove the vent to the left of the radio before popping out...also helps to have an OBDII reader to reset if you get a network CEL (happens from unplugging gauge cluster should reset itself automatically but helpful to have reader in case it doesnt)...odd issue with the OEM remote as it would start the car, but then couldnt lock/unlock doors...spoke with Mike in support and he was great, sent me a new harness and the 1 button remotes then walked me through the programming and the remote start works like a charm! If anything the 1 button remote is better because it doesnt make the obnoxious horn honk when it remote starts the way the OEM remote does...In any case a great, inexpensive, not to mention easy way to add remote start that is head and shoulders above the factory Subaru remote start option...again kudos to Mike for all his help

S
SC
2021 Forester Push to Start

Solid kit with everything you need. Instructions for accessing the immobilizer module could be a little better, you may not have to remove the dash and instrument cluster. If you look straight up from under the dash you can see the module tucked behind the cluster. If you reach up you may be able to reach it depending on your arm length/size to reach the connectors you need. Customer service was great with a question I had and turn around from the stage 2 programing was fast.