2020 2021 2022 2023 Toyota Tacoma Remote Starter 100% Plug & Play Kit for Push Start

Sale
$199.00
Regular price ~~$249.00~~

Select An Option

Quantity

Toyota Tacoma Remote Start Plug & Play Kit for 2020 2021 2022 2023 Push Start

The ONLY 100% plug & play in the WORLD for the 2020 2021 2022 2023 Tacoma!

Get the best remote start kit for your Toyota Tacoma. Easy installation can be completed anywhere from 15 minutes to an hour for most. No confusing diagrams, no sloppy wiring, no cutting, splicing, etc. Two easy plugs at the driver underdash and 1 in the passenger kick panel. Follow our easy installation instructions and you'll be done in no time! Simply press the lock button 3 times from your factory OEM remote and your vehicle will start and run. The parking lights will remain on to let you know the vehicle is running. Once you are ready to drive simply unlock the truck with the remote and open the door. Your vehicle will shut off upon opening the door - just jump in, restart and go!

Complete Kit comes with ALL parts required.
Simple programming no dealer visit necessary.
The ONLY 100% plug & play in existence!
Printed installation instructions included.
PLUG & PLAY install - Easy!

Remote Start Compatibility Requirements

2020 2021 2022 2023 Toyota Tacoma
Automatic transmission only.
10th Digit of VIN must be an L, M, N or P
Vehicle must have Smart Key / Push Start system
Vehicle will shutdown upon opening the door

Installation Video

Coming Soon!

Remote Start Operation

Operating your remote start is easy. From your factory remote fob press the lock button 3 times to activate the remote start. The parking lights will flash and the vehicle will start and run for the preset time typically 15 minutes. Pressing the lock button 3 more times will shut the vehicle off. Be sure not to press the lock button too fast or too slow the timing may take a few tries to get used to. When approaching the vehicle simple unlock/open the door. The vehicle will shutdown and you are ready to jump in restart and go!

Purchase Upgrade Options Explained - Select Above

3x Lock from OEM Fob Only = No additional remotes to carry simply press LOCK 3 times on your factory remote to activate the remote starter. Need more range? Check out the upgrade options below:

1-Way 1000 ft = Comes with (2) 1-Button remote fobs for up to 1000 ft range + 3x lock from OEM fob will work as well.

2-Way 2000 ft = Comes with (1) 1-Button 2-way remote fob and (1) 1-Button 1-way for up to 2000 ft range + 3x lock from OEM fob will work as well.

SmartPhone App Control = Start your car from your smartphone from anywhere in the world. First year is FREE and then $49.95/year & 3x lock from the OEM remote fob will work as well.

Customer Reviews

Based on 6 reviews Write a review

Problem Kit

It's this kit once last year on the 2023 4 runner with No issue. But this time try to install on 2022 Tacoma had alot of problems. I try to email you guys but no response. Then I had to call you guys alot of time to get help. Finally I got help and told me need to cut a wire to get it work. But this kit should be plug n play no cutting. But after it's working. Then I found out hard way it won't turn off after 15-20 min after remote started. So the truck was running for over 8 hrs til I found out. After email and try to call alot of time. Finally got reply and sent me different unit and new kit to get it work fine. I had to do this for 4 times to get it work and I had to told you guys the instructions was not clear.

works like a glove!

Did as exactly as the instructions say and everything works perfectly! I would buy another one if i had another truck. Heck, i might buy another one in case i get a second vehicle. Thank you Accessorides!

Brake Override Malfunction Error Code

Did exactly as the instructions insisted and as the green light turned on and went out on the module to indicate “programmed”, I couldn’t start the vehicle because my “hood [was] ajar”. I wiggled wires and open and closed the hood, but the truck wouldn’t start. So I disconnected it all in reverse order and guess what, truck would start again, but I got an error code for “brake override malfunction, visit your dealer”.

So I’m not sure wtf is going on but I plugged it into the correct adapters and right connections, yet I get all these errors.

The instructions even said to unplug the red, white, and blue plugs from the module if you have remote starter and I don’t (obviously), so I skipped that step as it instructed.

But that’s the only thing I didn’t try yet and I need to get stuff done so I unplugged it all and set it aside. So far it’s just a head ache and waste of money. Other options from different companies where people actually provided videos and clear instructions through YouTube seem to have raving reviews and even simpler plug and play options.

I’ll update my review after I get my truck back from the dealership to fix the error code that this product gave me. As well as a several hundred dollar bill nobody needs.

AS ADVERTISED PLUG AND PLAY

The remote start works really well, installation was easy, shipping was impressive, high quality product and great tech support! Made in America, professionally assembled!

Plug and play no super IQ needed

Super easy to install hardest part was finding the plug ins after that 3 simple plugs wait fir a green light on module your done no super IQ needed A+ rating

1 2