Toyota Tacoma Remote Start 2016 - 2023 - No Keyless - Plug & Play - H KEY START

Remote start from your iphone or android smart phone

Toyota Tacoma Remote Start 2016 - 2023 - No Keyless - Plug & Play - H KEY START

Sale
$325.00
Regular price ~~$399.00~~

Select An Option

Quantity

Toyota Tacoma Remote Start Kit for 2016 - 2023 WITHOUT KEYLESS

Note: This kit is for vehicles WITH power locks but WITHOUT factory keyless entry. Meaning you have to manually lock/unlock your truck by putting the key in the door.

Remote starter kit for your 2016 - 2023 Toyota Tacoma with the plain standard key start ignition. (Letter "H" stamped on the shaft of the key) Plug & play installation with easy to follow instructions included. Not only are you upgrading to remote start but you will have (2) 4-Button remotes with keyless entry (lock/unlock) functions as well.

All parts included complete DIY KIT!
Full Plug & Play installation
Includes printed installation instructions
Easy to program no dealer visit needed.

Compatibility Requirements

2016 - 2023 Toyota Tacoma Remote Start
Automatic transmission only.
Vehicle must have normal key start ignition
Key must have letter "H" stamped on metal shaft
Not compatible with push start models
Not for vehicle with factory keyless entry - see our 3x lock kit!
Vehicle must have power locks
Allows normal takeover. Does NOT shut off when opening the door

Installation Overview

Install is simple and all connections are at the driver underdash area.

Purchase Upgrade Options Explained - Choose Above

1-Way 1000ft = Comes with (2) 4-Button remote fobs for up to 1000ft range.

2-Way 2000ft = Comes with (1) 4-Button 2-way remote fob and (1) 1-Way remote fob for up to 2000ft range.

Smart Phone Control = Start your car from your smartphone from anywhere in the world. First year of service is free, $49.95 each year after. Includes 4-button remote option as well.

Customer Reviews

Based on 7 reviews Write a review

22 Tacoma SR kit

This kit was easy to install. The harness was wired professionally and looks great. Everything works as promised. Instructions were great and easy to read!

Very good instructions.

I was so glad I decided to buy and install. Wiring was easy. I fished my antenna wire from overhead dome light to pillar . I found it easier. Take your time and put everything back together and you will never know it's aftermarket. Works really good. Customer service will answer any question you have very fast.

Great Upgrade

Installation in my 2019 Tacoma Access Cab was a snap. Love the plug n play wiring harness. This added not only the remote start but now I'm able to unlock the truck with a key fob.

AWSOME

Dummy prove installation, right plugs (nothing to cut or splice) Good price

Easy installation but I ran into a problem

I installed the kit in about 40 minutes in my 2023 Tacoma, but…

All went well until I tried to use the remote start. The keyless entry worked fine. When I pushed the remote start button it gave me an error code of 3 flashes followed by one flash. The manufacturer included card stated this was an error code for “engine running” but the engine was not running. I did some online research on the manufacturer website and it stated the error code indicated either the engine was running or the tachometer needed to be programmed. I couldn’t find any instructions on the website or in the instructions included on how to program the tachometer. I did an online search and found a video made by the manufacturer (not accessorides) that explained how to program the tachometer. It took me a few tries but I got it programmed and everything works great. However, had the included instructions explained this could be needed and had directions on how to do it, my install would have only been 45 minutes instead of 2 hours. The wiring harness is really nice and it seems like a high quality part. I would give it 5+ stars had the instructions covered the issue of needing to program the tachometer. I suggest Accessorides update the instructions to include this procedure.

Hi Terry! Glad to hear you got it up and running! Our printed instructions include those steps it is the 'Stage 2' of the programming section. Thanks again!

1 2